See the full product description & videos here
- Monocoque (one-piece) frame and fork construction
- TORAYCA T1100-KS (frame) / TORAYCA T700S Nano Alloy Resin (forks)
- Accepts 120mm Disc Brakes & All V-Braking systems
- Fully captive, solid carbon rear dropout featuring the Supercross BMX FLIP/CHIP
- Built-in chain idler/guide
- Traditional Euro BB Shell bottom bracket
- Each Pro Chassis contains:
- 1 x Vision F1 Frame
- 1 x Vision F1 matching fork
- 1 x Steering tube top cap
- 1 x 20mm adapters
- 1 x Hydraulic disc brake adapter kit
- 1 x Mechanical disc brake adapter arm
- 2 x Removable V-Brake mounts
- 2 x FLIP/CHIP’s (15mm & 10mm)
- 1 x Chain Idler/Guide
- 1 x Sealed Bearing Headset
- Mini, Junior, Expert & Expert XL Chassis kits only contain 1 set of FLIP/CHIPs for the 100m axle size. They also use a 10mm front dropout on the fork.
FRAME GEOMETRY
Supercross BMX VISION F1 Carbon Race Frame Geometry Chart
| VISION F1 Carbon | Pro 24" |
Pro XL 24" |
Pro XXL 24" |
| A. Top Tube Length | 21.5" | 22" | 22.5" |
| B. Chainstay length | 15.3" | 15.3" | 15.3" |
| C. Steertube Angle | 73.5º | 73.5º | 73.5º |
| D. Seat Tube Angle | 70º | 70º | 70º |
| E. Bottom Bracket Height | 11.6" | 11.6" | 11.6" |
| Seat Post Size | 27.2mm | 27.2mm | 27.2mm |
| Headset Type | 1 1/8" - 1.5" Integrated | 1 1/8" - 1.5" Integrated | 1 1/8" - 1.5" Integrated |
| Wheel Size | 24" X 1.75" | 24" X 1.75" | 24" X 1.75" |
* Specifications will vary depending upon your choice of Fork, Tire and Rim selection. Measurements are based off of a Supercross Fork and equal size (ie. 20X1.75 front and rear) tire combination. Specifications subject to change without notice.All weights are measured on a UPS Calibrated Scale. Weights will vary depending upon the amount of powdercoat and the amount of filler rod used on a particular frame. Polished Frames and Anodized Frames are the lightest as there is no paint. Weights and Specifications are subject to change without notice.
TRUSTED AND DESIGNED FOR THE PROS
PAT COO
National BMX Champion Pat Coo runs Billet BMX® components including Internal Bolt Chain Tensioners and Titanium Axle Bolts on his Race Bikes. "Billet makes High Quality Parts that I can Trust with Confidence so I can Focus on Winning Races"
MR BILLET
I spend a ton of Time Designing all of our High End Parts with Elegant Styling and Precision Fitment. Plus, they have to be Strong Enough to Survive Abuse from Pro Athletes and the Largest Riders. I Strive to make Billet BMX® parts the Best in the Industry.
ZACH LEWIS
Dew Tour, Vans Triple Crown and X Games Athlete Zach Lewis runs Billet BMX® Components including Axle Nuts and Internal Bolt Chain Tensioners. "I need High Strength Parts that can Handle my Backflips and Tricks without failure. I can always count on Billet."
bike Parts & Clothing
Billet BMX has you covered with High End BMX Bike Parts & Clothing. Match your Bike in Style with a T-Shirt, Hoodie and Snapback Hat.
